The Lekki Ikoyi Bridge in Lagos is the first cable-stay bridge in Nigeria.

PERI Products

You can view the full range of PERI products below.

All Products

Use the filter function below to find the product you're looking for and its application.

HANDSET Alpha offers a high degree of application flexibility. The panels can be used for a wide range of construction projects.
The universal lightweight formwork for walls, columns and slabs
The choice of girder is based on project- specifi c requirements: the GT 24 Lattice Girder allows large spans and thus reduces the number of parts to be moved. The VT 20K Solid Web Girder is the cost-effective solution for smaller slab thicknesses.<br/>
Extremely flexible work scaffold for a wide range of applications.<br/>
Used throughout South Africa, QUICKSTAGE has been tried and tested and is the preferred cost-effective solution for façade scaffolding for contractors. The system incorporates various components that allow for any configuration required. <br/>
The PERI Screw-On Sleeve is a simple and cost-effective device for the temporary mounting of edge protection on reinforced concrete slabs
VT 20
Formwork carriage used on the steel substructure for the construction of carriageway slabs
The lightweight for new construction and refurbishment projects
The system consists of different types of load and length optimized frames, which enable to continuously create every span with the corresponding combination.
Shoring system for very large loads in bridge constructions as well as for special applications in industrial construction
The movable, anchor-free solutions for bridge infrastructure. Perfect for bridges over 150m long.
The fast, rentable solution with the best handling and reduced material quantities
The mobile solution installed below for bridges over 150 m long
You can analyse the data collected from the sensors and submitted to the cloud in real-time from anywhere.
The PERI InSite Pressure Sensor was used on the Regent Street Flyover project in Leeds.
The PERI InSite Temperature sensor installation
Powder coated<br/>Reduced cutting and working of materials on site<br/>Low safety risks – simple tools and low weights<br/>Available in different configurations<br/>Fix – for frequent use with common dimensions, available in wall sizes 20, 24 and 25cm
Scaffold-free cantilever formwork for steel composite and precast concrete bridges
Continuously adjustable circular formwork for radii greater than 1.00m without panel alterations<br/>
The drive rails are available in two variants, depending on the type of project at hand: RCS MAX C and CL. Both allow the platforms to be moved safely in 750 mm increments.
Flexible girder wall formwork, also for high-grade architectural concrete surfaces.<br/>
High production quality for ensuring perfect concrete surfaces<br/>
All heights, all cross-sections, regardless whether square or rectangular-shaped<br/>
With PERI SCS, the loads from the fresh concrete pressure are transferred without formwork ties through the brackets into the climbing anchors of the previous concreting section.<br/>
The Self-Climbing System ACS-R with the one-sided reinforcement scaffold in advance.
The CB climbing system provides safe working conditions with wall formwork at all heights.<br/>
The universal working and safety scaffold.<br/>
HR Render image of the PERI VTC Tunnel Carriage
Supporting structures cost-effectively erected with system – with materials and expertise from a single source
Either the Heavy-Duty Tower as the Truss Girder are adjustable to the correct height and length.
Construction of superstructures using the balanced cantilever method – fast and dimensionally-accurate
A safe and clean solution for short bridges and redevelopment.
The formwork carriage, which consists of rentable standard material, is optimally adapted to the geometrical and static boundary conditions and therefore provides a very cost-effective solution.
3D Formwork Units: Precision-made for an individual design
Concrete release agent for all formwork and equipment
A highly visible and robust safety feature for reinforcement bars.
To reduce injuries from impacts associated with working around rebar.
The DK and SK tie systems serve to ensure subsequent, reliable sealing of tie points.
The cost-effective solid web girder
A complete programme, can be telescoped to reach a length of 14.00 m
Temporary edge protection for your projects.
The versatile lattice girder with high load-bearing capacity.
With the ISC SONO WZ Analyser, the water content of fresh concrete can be quickly and precisely determined on site.
Used as a cost-saving lightweight individual prop and cost-effective shoring tower<br/>
The latest addition to the PERI UP scaffolding toolkit, PERI UP Easy is designed to improve both safety and productivity for façade applications.
Extremely adaptable and with a high load-bearing capacity
The lightweight stair tower for flexible access solutions
For high requirements regarding load bearing capacity and accessibility.
Easy, safe and fast assembly
The PERI UP Rosett R scaffold system is a modular reinforcement scaffold for efficient work.<br/>
The suspended scaffold can be manoeuvred with little effort due to smooth plastic rollers.
Modular Reinforcement Scaffold for efficient work.<br/>
For wide-span working platforms and temporary pedestrian footbridges
Fast and safe assembly with guardrail in advance.<br/>
Safe and fast assembly due to ledger with Gravity Lock.<br/>
The maximum level of flexibility in shoring solutions.<br/>
The cost-effective shoring for slab tables and high loads<br/>
The maximum level of flexibility in shoring solutions Shoring Systems
The heavy-duty prop with integrated load control<br/>HD
The tubular steel prop for daily use on construction sites
The galvanized tubular steel slab prop from PERI with up to 50 kN load-bearing capacity
Support for all types of decking forms with a max. load capacity of 40kN
For the forming of monolithic concrete up-stands in slabs
CEMflex is the most tested solution for waterproofing concrete structures and can be easily fit into place with a clip.
The permanent stop end system for the installation of construction joints.
The absorbing formwork panel for matt concrete surfaces with few cavities.<br/><br/>
The PERI Birch formwork panel is a high-quality plywood for almost any type of application.<br/>
Formwork girder